Nuts and Washers Selector

Galvanised fasteners

Galvanised fasteners

Galvanised fasteners: Nuts, UNC Nuts, Washers etc.

Galvanised fastenersThere are 53 products.

Subcategories

  • Galvanised Washers

    Choose from our range of galvanised washers such as flat or spring washers.

    Galvanised - A duller finish than BZP, typically 50 microns thick covering of Zinc and therefore provides much more protection suitable for many out door applications

  • Galvanised Heavy Hexagon Nuts - Din 934

    Galvanised Heavy Hexagon Nuts Din 934

  • Galvanised UNC Hexagon Nuts
    Galvanised UNC Hexagon Nuts - BS 1768 - Tapped Oversize. Since hot-dip galvanizing typically adds 2.2 to 5 mils of thickness to the threaded portion of a fastener, galvanized heavy hex nuts are tapped oversize to compensate for the corrosion resistant coating on the thread of the bolt
  • Galvanised Hemispherical Cup

    Galvanised Hemispherical Cups are cylindrical with part of a sphere cut out of one side with a hole in the center that corresponds to the thread size being used. They are used alongside hemispherical washers which sit together allowing for up to 10 degrees movement from the vertical.

  • Galvanised Hemispherical Washers

    Hemispherical Washers are half a sphere with a hole perpendicular to the flat side which corresponds to the thread size you will use it with. They are used alongside hemispherical cups which sit together allowing for up to 10 degrees movement from the vertical.

    Galvanised - A duller finish than BZP, typically 50 microns thick covering of Zinc and therefore provides much more protection suitable for many out door applications

per page
Showing 1 - 12 of 53 items
Showing 1 - 12 of 53 items